15362 Autoloader ALE: STEP : axis 1 AWAY limit switch is active Trendsetter_400/800_Proofing First select the RESUME button from the workstation dialog box. If this does not correct the problem, then select RESET TRENDSETTER from the workstation TRENDSETTER pull-down menu. If the problem persists, call Creo Service. If the procedure described in Operator Action does not correct the problem, then the stepper controller must be re-initialized. Do this either by typing "vr init" or "ale init", or if that does not work, by resetting the recorder. Alert The Proofer TTE if this error occurs. This error occurs when the stepper motor HOME switch becomes active before the stepper motor has finished moving. Likely a hardware problem, as the away limit is not used for the proofer. ..\..\ShowAllErrors.htmFirmware 0 Error Index ..\..\ShowAllCommands.htmFirmware 0 Command Index ..\..\ShowAllNVS.htmFirmware 0 NVS Index Updated: Wed Jul 16 19:33:04 2008 PST